Friday, April 18, 2014

Solar Upcycled Chandelier

I found this old chandelier at my local salvage building supply store for $3.00.  Nothing special, but nice bones.  I thought it would be fun to add some color and solar light to make this a fun and functional accent light on my back porch deck.


I started by taking the light fixture apart and then snipping and removing all of the wires.


Next I primed and painted.  I painted the metal pieces with a metalic oil rubbed bronze and the center spindle a pop of blue.


Reassembled.



Since I would not be using any glass globes I inserted some weatherstripping foam tubing to keep the socket from moving around.


I purchased some dollar store solar yard lights for $1 each.  The ones I bought were too wide to set inside the socket securely so I inserted a ball of epoxy in the socket, then pressed the light int it and twisted to seat it securely.



Here is the finished solar chandelier in both daylight and at night.



Thursday, April 17, 2014

Recycled Closet Door Raised Bed

Re-purpose old bi-fold closet doors into raised planter beds.  I picked up my bi-fold doors at Habitat For Humanity ReStore for about $5 per pair.  The doors each measured about 6' 6" long and were 12" wide, perfect dimensions for the sides of a raised bed.  I cut some 12" x 2" boards 3' long to use as the ends.  I simply attached the bi-fold doors to the boards with 2.5" screws and that was that.


Cheap, easy, and eco-friendly!  

Notes: 

Use solid wood bi-fold doors, not the newer kind you see that are mostly constructed of mdf.

Girl Scout Daisy Headband

I wanted a good way to keep a visual of our troop in a crowd of Daisies at Daisy Days, so I created these unique headbands.  It worked, our girls were very easy to spot.

I started with these Dollar Tree headbands.  I removed the butterflies and saved them to use for another project.

Next, I cut all the Daisy petals and center out of felt and attached to felt backing with hot glue.  Once set, I cut around the shape of the Daisy.


Turn flower face down with the light blue petal at the "12 o'clock" placement and place a quarter size glob of hot glue in the center.  Hold the tip of the headband antenna flat into the glob of glue and place a small square of felt on top.  Press down until glue sets.  My apologies for not getting a photo of this step.

Here is the finished product.  Time consuming but worth it.  Imagine a troop of 1st graders wearing these... very cute!



Friday, July 5, 2013

Recycled Chair Swing



I saw a picture of a chair swing one day and loved it but didn't have a good spot for one, until now that is.  We had an existing deck swing that was a rope hammock style chair swing and it was great until it "wore out", and by wore out I mean that my 6 year old brandishing scissors resulted in a giant hole right where one would sit.  Serendipity... a wonderful excuse to make a recycled chair swing.

This is an ideal project to recycle a broken chair that you hate to just throw away.  I didn't have a broken chair so I picked one up at Goodwill for a few bucks.  Here is the "before" of our chair.


I planned to string rope directly through the chair seat, so I started by drilling my four holes.  After the holes were drilled I cut off the legs.


Now time for a shiny fresh coat of paint.  I used Rustoleum 2X primer/paint in a semi gloss indoor/outdoor and bravely let my daughter pick out the color.  I was so sure she would try to talk me into pink, but she surprised me and went for a nice warm orange.


Lastly, I strung the rope and used a figure eight knot that the guy at Home Depot assured me would be strong.  I attached the swing rope to some chain using large "S" hooks, chain and mounted it to the deck arbor beam using a swing-set screw kit.

This was a very quick and easy weekend project.  The chair, paint, rope and hardware cost about $25.


Sunday, May 26, 2013

DIY Butcher Block Countertop

I love the look of a butcher block counter top, especially paired with white painted cabinets.  This project is one more little piece of the greater puzzle that is our longestcheapestkitchenmakeoverever!  As with every other aspect of our kitchen makeover I have been looking for ways to get the look I want while re-purposing items and seeking out salvage sources for materials whenever possible.  It is my two birds with one stone approach, both kind to my wallet and kind to the planet.

In researching options for an economical butcher block style counter top I found methods all over the spectrum in terms of expense and degree of difficulty.  While I am fairly adventurous when it comes to tackling the DIY unknown, I am well aware of my limits in patience and skills set.  Two methods caught my eye that seemed doable and when I stumbled across some bundles of scrap oak flooring at Habitat For Humanity ReStore it was decided which method I would tackle.

I have taken to swinging by my local HFH ReStore now whenever I am in the vicinity because good stuff doesn't last long and you never know what items might have been marked down up to 75% off the already low prices.  It was one of these visits that I stumbled upon plastic wrapped bundles of unfinished brand new tongue and groove oak flooring scraps marked down to just $3.50 per bundle.  There were about 10 scrap planks per bundle varying in size from 12-18 inches in length.  I grabbed the four bundles that they had figuring that it would be more than enough for my counter top project.  This small counter top used 2 full bundles ( 20 scrap planks), that is $7.00 in wood materials.  Add in 2 tubes of liquid nails ($6 rounded up), a small tin of stain/poly ($6 rounded up), and you have a counter top for roughly $19.00 and I'm pretty sure that you can't beat that with other low cost solutions such as laminate or tile.  Although I must admit that I also used a thin plywood base for this project which I had in my scrap pile, so I guess the project could have cost a bit more if I had needed to purchase some plywood.

I should also mention that the base cabinets that this counter top is for were also salvage cabinets from Habitat For Humanity for the bargain of $30, the book case attached on the far right was constructed out of wood I salvaged from some cabinets that we removed above our peninsula.

Here is how we tackled the counter top:

I started by cutting a plywood base to the dimensions of the cabinets and anchored the plywood to the cabinet.



Using liquid nails I began installing the wood flooring on top of the plywood.  I chose to lay it starting in the far right corner with the groove sides to the back and right edges.  This leaves the tongue sides facing outward.  Use a hammer as needed to set the planks tight.


You will end up with some uneven edges on the left end, I trimmed those with a saw after they were set.
You might have some high low spots at the plank joints, so sand those smooth.  I sanded with a rough grit to level out the high low spots then finished off with a fine grit to give a very smooth finish.  I shaped the sharp corner with the sander to create a smooth rounded corner for safety and aesthetics.  I had originally planned to trim off the tongue for a straight edge and then add a trim piece.  My husband said he liked the shape of the tongue edge and that gave me a convenient out as my confidence was wavering as I faced the task of achieving a straight edge.  By leaving the tongue edge it gives the appearance of a decorative router edge.


After the boards were sanded smooth and wiped down with a damp cloth, it was time to stain.  I opted to go with an all-in-one stain and poly in Pecan with a satin finish.


The Pecan stain gave the oak a little more warmth and depth without being too dark.  Just the right amount of contrast to the white cabinets.


I will be adding a thin strip of white trim where the cabinet base and plywood meet for a more finished look. I am happy with the look of the white and butcher block.


Well I hope this simple and budget friendly project will inspire you to re-think how you see materials.  Flooring isn't just for floors.  Thank you for stopping by!


Wednesday, May 15, 2013

Salvage Headboard Bench

I am so excited to have finally finished this little bench for my backyard!

This project was another born out of distraction while visiting Habitat For Humanity ReStore in search of materials for one project or another.  It happens nearly every time, I'm heading back to the cabinets or tile and this little voice in my head shouts,"Squirrel"!  In this case a cute old worn oak headboard and footboard with a $5 price tag jumped out at me.  As soon as I saw it a picture popped into my head of exactly what it would look like as a bench and I knew I must take it home.  Like many of my projects born out of distraction, this one got tabled for a while before I could get back to it, so it sat in the garage for many months... okay about a year... in which time it annoyed the crap out of my beloved garage hogging husband.

I began by cutting the footboard so that it could be used as the sides of the bench.  Depending how deep you want the bench to be, you can either cut it in half, or take a strip out of the middle to get the desired width for the sides.


The next step was to cut wood to build a seat box.  You can use 2x4's, but I just used what I had in my scrap pile, which was slightly smaller.  Cut the 4 strips according to your desired dimensions so that the seat box can be attached to the headboard flush on the sides.


Next, you want to attach your pieces to build your seat box.  If you are using 2x4's you should be able to assemble the box with screws.  I opted to use some "L" brackets because my boards were smaller than 2x4 and I wanted to avoid splitting.  You can see that my shorter cuts for the side are thinner than the longer front and back pieces and that is because I was using wood from my scrap pile.  The thicker pieces were the leftover crosspieces from a cedar picket fence panel and the thinner pieces were once part of a sofa that we dismantled for recycling.


I then attached the seat box directly to the bench back (headboard).  I measured and attached it to achieve a 17" standard seat height.

 
Next step, attach the footboard sides fastening it to both the sides of the headboard and the seat box.  I chose to add some additional "L" brackets to the underside of the seat box and headboard/footboard pieces for added support.


Lastly, I cut some scrap boards from the kids old play structure to form the seat top and fastened them to the seat box.


Finally, the fun part!  I used Rustoleum outdoor/indoor paint in Maui Blue to give this little salvage scrap bench a fun pop of color.  I used one yard of outdoor fabric in a fun print to sew a seat pad cover,which I then stuffed with an old queen size mattress pad.  

This was a very quick and budget friendly project. Total spent was only $33

- headboard/footboard $5
- scrap wood $free
- paint $16
- fabric $12
- mattress pad for seat filler $free


Thank you for stopping by and I hope this post will inspire you to get out there to your local salvage store or garage sales and tackle your own upcycle project.


 

Thursday, April 25, 2013

Salvage French Door Arbor

Doors, doors, doors!  What fun it is to rescue a lovely old door, or pair of doors, and give them new purpose.  I also love how an arbor frames a gate, drawing ones eye and inviting them to come and see what is on the other side.  So, why not an arbor made of old doors?!


Again, I am urging everyone to visit their local building salvage stores and see what fun projects you can come up with giving new life to something old.  I found a pair of 24 inch wide French Doors at my local Habitat For Humanity ReStore.  These beauty's were only $8 each.  So, add in another $4.50 for some 2 x 4's and you have a sturdy and attractive arbor for less than $25.  That is a big savings over the typical lattice arbors you see sold in big box stores.

Here are the lovely doors that I started with.


I then measured the thickness of the doors.  This would be the thickness of the notches I would cut into the 2 x 4's for the top.  I also measured the width of the 2 gate posts to determine how far apart the notches should be on the 2 x 4's.  Once I determined the total width of the top connector beams I miter cut the ends of the 2 x 4's at a 45 deg. angle for a little flair.  My apologies for not getting a picture of this next step, but I marked off the size I needed the notch to be ( the thickness of the doors) and made several straight cuts only half way deep, setting the 2 x 4 on it's side and using the miter saw.  After making several cuts close together I used a chisel and hammer to remove the remaining wood in the "notch zone".  This is how it looks when you are done.

If you are going to paint your top connector beams I suggest you paint them before assembly as I did.


I laid the doors on their sides and attached the top beams with screws to the top of the door. Please ignore the expert photo with finger in the way, you get the idea ;-)


Then set the arbor up in place.  Due to the weight of the doors, I suggest that you get some fencing brackets and anchor the arbor to the gate posts for extra stability. 


So inexpensive and so easy!  Now I need to plant my climbing roses and wait.  In the meantime I will just have to imagine it covered in beautiful orange and red roses.

Thank you for stopping by, now get on out there and rescue an old door and have some fun with it!